Standard
Regular panel upgrade
$2,200 to $6,500
New panel and breakers. A full 100 to 200 amp overhead service starts at $6,500.
- New box, new breakers, everything relabelled
- Permit and inspection included
- What I quote unless you ask for more
Premium · Leviton Smart Panel
Quote in 60 seconds. Master Electrician calls back.
Drop your number. Dmitry calls the same day, or first thing next morning. No pitch, no forms.
Got it. Dmitry will call from (780) 904-3462 the same day, or first thing next morning.
Master Electrician #13824. Reply STOP to opt out anytime.Leviton Smart Panel in Edmonton 37 circuits, each one on your phone
Plain grey panel out. A 66 space Leviton in, with 37 smart breakers, surge protection and the solar on its own breaker. Here is the whole job and what the extra money buys.
Master Electrician #13824, 14 years on the tools
37 smart breakers, 12 of them AFCI
Solar on its own smart breaker
This one, fully loaded, came in around $10,000. Standard panel swaps from $2,200. Free quote, no obligation.
What it costs
- Standard panel upgrade$2,200 to $6,500Siemens or Square D panel swap. Permit and inspection booked. Full 100 A to 200 A overhead service from $6,500.
- Premium tier, Leviton smart panelUp to $10,000For one loaded like my Leviton job, 37 smart breakers.
- Load management device$1,200 to $1,500Installed, if your panel is full.
One flat number before I start, in writing.
See every priceHands free
Say it. Tap it. Or let it run itself.
With a Leviton smart panel, one app runs the breakers, the lights and the EV charger, and it all works with Google Home, Alexa, SmartThings and Apple Home.
- From anywhere
- One app
- Your voice
Leviton says My Leviton devices work with Matter, Amazon Alexa, Google Home, Apple Home and SmartThings. Source: Leviton smart home page, read 30 September 2026.
Call (780) 904-3462The job in numbers
What went into this panel
The house has solar and a 200 A service. It got a new Leviton panel, 37 smart breakers and surge protection.
- 37smart breakers, every one in the app
- 12of those are AFCI smart breakers
- 66space Leviton panel
- 200 Aservice
- 1smart breaker just for the solar
- 2full days, two of us
Before and after
Same wall, a whole different panel
Grab the round handle and drag it sideways. Left of the line is the old panel. Right of the line is the Leviton that replaced it.
How the job went
Old panel out, Leviton in, in five steps
The old panel was a plain grey box with standard breakers. We pulled it and built the Leviton in its place. Two of us, two full days. Honestly the coolest upgrade I have done in my career.
Rough in to finished
The smart breakers go in last
Leviton says the whole panel can be wired at rough in with no breakers present. The left photo is this panel at rough in. The right photo is the same panel finished.
What the breakers do
What these breakers do, in Leviton's words
I install these, Leviton makes them. So these are Leviton's own claims, with a link to each one.
Live watts on every circuit
The My Leviton app shows what each smart breaker is drawing, plus history as kWh or a cost estimate.
Leviton app guideOff and on from your phone
Leviton says you can turn its smart breakers on or off remotely, and set schedules by time and day.
Leviton LB115-ST pageSchedules
Leviton's own example: set up a schedule to turn off your hot water heater at night.
Leviton smart breaker spec sheetAlerts
Leviton gives the examples of a freezer not running, or an HVAC system running for too long.
Leviton smart load center pageTrip lights that stay on
Leviton says the lights stay lit even after a breaker trips, and identify the cause of the trip.
Leviton smart breaker spec sheetAFCI reset lockout
Leviton says its AFCI breakers will not reset if the arc fault protection is compromised.
Leviton LB120-AST page
One limit, straight from Leviton's app guide: a tripped breaker must be manually restored. So a trip still means a walk to the panel. Leviton app guide
Inside the panel
How 37 smart breakers fill a 66 space panel
Tap a type to light it up on the diagram.
37 smart breakers across 45 of the 66 spaces. A two pole breaker takes two spaces.
Diagram, not the real breaker order. Main breaker and surge protector not drawn.
Standard panel or this one
What you get that a standard panel does not give you
| Feature | Standard | This Leviton |
|---|---|---|
| Live watts on each circuit | No | Yes |
| Switch a circuit off from your phone | No | Yes |
| Put a circuit on a schedule | No | Yes |
| Alert when something runs too long | No | Yes |
| Use and cost history for each circuit | No | Yes |
| See the breakers with the door shut | No | Yes |
Both do the basic job of a panel. The difference is what you can see and control.
The money
Why it costs more than a standard panel
A standard panel upgrade runs $2,200 to $6,500. A panel loaded like this one came in around $10,000.
- Standard panel upgrade, Siemens or Square D: $2,200 to $6,500
- This Leviton panel, 37 smart breakers: around $10,000
What the extra money buys
- 37 smart breakers in place of standard ones
- The Leviton energy monitor the smart breakers need to run
- Surge protection on the panel
- The window door, so you see the breakers with it shut
- Two of us for two full days
You do not have to go all in. Leviton says homeowners can upgrade the whole panel or just one circuit at a time. Leviton smart load center page
Your panel gets its own quote. The numbers here are this job and the standard range on this site.
Two tiers
Standard or premium, your call
Standard is what I put in by default. It does the job. This Leviton is the premium option, for when you want every circuit on your phone.
Premium
Leviton smart panel
Up to $10,000
This one, 37 smart breakers, came in around $10,000.
- Every circuit in the app, live watts
- Alerts and schedules
- Use and cost history for each circuit
Neither number is a quote. Your panel gets its own number after I see it.
What Edmonton homeowners say
Real reviews from real Edmonton homes. Read them yourself.
Every quote below is verbatim from our Google Business Profile. Licensed, permitted, and inspection ready. Click through to verify any review yourself.
We had Dimitry to do all the electrical when we finished the basement for an in-law suite. When we had our final inspection we failed. We called Dimitry and told him and he showed up the next day to address the issues on the inspection report. He has made all the repairs required by the inspector and has offered to be here when the inspection is being done to ensure all is fine. We are very happy with the service.
We have used them on multiple projects and are very happy to say they are our Edmonton electricians!! They do great work and are very professional !
Who it is for
Worth it for some houses, not for every house
It makes sense if
- You want to see what each circuit uses and costs, not guess from one bill.
- You have solar, or a battery is on the list.
- You are away a lot and want to shut things off from your phone.
- You are renovating anyway and want the panel done once.
Save your money if
- You only need more amps. A standard panel upgrade does that for a lot less.
- You will never open the app. Then the smart part is money sitting on the wall.
Questions
Leviton smart panel questions
What does a Leviton smart panel cost?
This one, a 66 space panel with 37 smart breakers and surge protection, came in around $10,000. A standard panel upgrade runs $2,200 to $6,500. I quote yours after I see your panel and your circuits.
Can I start with a few smart breakers instead of all of them?
Yes. Leviton says homeowners can upgrade the whole panel or just one circuit at a time. The smart breakers are designed for the Leviton panel, so the panel comes first. I can price it both ways so you can compare.
Can I reset a tripped breaker from my phone?
No. Leviton says a tripped breaker must be manually restored. The app turns breakers off and on, runs schedules and shows live watts. A trip still means a walk to the panel, and the breaker's own light tells you why it tripped.
What does the app actually show me?
Leviton lists live watts for each smart breaker, history as kWh or a cost estimate, and alerts for things like a freezer not running or an HVAC system running for too long.
Does it work with solar?
On this house the solar lands on its own two pole smart breaker. Leviton says its Whole Home Energy Monitor can also track production from solar, a battery or a generator, with extra current sensors added for those.
How long does the install take?
This one took two of us two full days. A bigger service or utility work on top can add time, and I will tell you that before we start.